Filter
Top Products
What if ... Possible fault Fix
shortly after starting a
program, the dishwasher
stops running and the
optic indicator flashes?
Water intake error.
The "Drain" indicator
flashes.
–
Turn off the dishwasher.
–
Open the water valve.
–
Clean the water inlet
filter, see maintenance
instructions.
–
The water pressure is
less than 4.5 psi
(0.3 bar).
Contact a plumber.
Drain error. Water remains
in the wash cabinet.
The "Drain" indicator
flashes.
–
Turn off the dishwasher.
–
Clean the triple filter.
See maintenance
instructions.
– Clean the drain pump
and the non-return
valve, see maintenance
instructions.
– Remove any kinks in
the drain hose.
after a program has
ended, the optic indica-
tor and the program in-
dicators flash?
There may be a technical
fault.
– Turn the dishwasher off.
Despite the problem the
dishwasher can be used.
If the indicator lights flash
again after the next pro
-
gram cycle, call the Miele
Technical Service Depart
-
ment.
there is a knocking
noise in the wash cabi
-
net?
The spray arm is hitting
an item in the basket.
Interrupt the program and
rearrange items blocking
the spray arms.
there is a rattling noise? Items are not secure in
the wash cabinet.
Interrupt the program and
rearrange loose pieces.
there is a knocking
noise in the water
pipes?
This may be caused by
the installation or the di
-
ameter of the pipe.
This has no effect on the
dishwasher. If in doubt
contact a plumber.
Frequently asked questions
38