Filter
Top Products
Entering the time of day
When the appliance is first connected
to the power supply, or after a power
failure "12:00" and the symbols "f"
and ")" flash in the display.
To set the time:
^
Press the buttons "Start" and "End" at
the same time.
"12:00" will appear in the display and
the "+/–" buttons indicator will light.
^ While the indicator light is lit,
enter the time in hours and minutes
by pressing the "+" or "–" button.
When the "+/–" buttons indicator goes
out, the time of day has been set and
the display will change in 1 minute
intervals. The colon will flash.
To conceal the time of day
The time of day display can be turned
off to save energy.
^
Simultaneously press the buttons
"Start" and "End" twice in succession.
The time of day will be concealed but
continues to run unseen.
To make the time visible
^ Simultaneously press "Start" and
"End" once.
The time of day can not be
concealed, changed or cancelled if
the timer has been set.
(To adjust for daylight savings, refer to
section "Turning additional features on
or off", feature 07).
Using the oven
17