Filter
Top Products
The c and AUTO symbols stay on con
-
stantly and the time entered counts
down. The oven door is locked.
At the end of the set time the micro
-
wave function, the heating and the oven
interior light switch off. A beep sounds
three times and the symbols flash.
Press any button to cancel them. The
oven door is no longer locked. The time
of day appears in the display.
If the food is still not cooked, the func
-
tion selector can be left pointing to Mi
-
crowave + Fan. Repeat the other steps
in the following order:
^ Press the g button.
^ Set the required time with the + or –
button.
The AUTO symbol flashes.
^ Press the h button.
The display shows a suggested
power level of 300 W.
The c symbol also flashes above the
dot.
^
Press the + or – button within 4 sec
-
onds to enter the microwave power
level required.
^
Press the Start/Stop button.
The period of time set appears in the
display.
Deactivating the door lock before the
end
To deactivate the door lock, you have to
interrupt the process.
^
Press the Start/Stop button.
During the interruption the time goes on
hold. The cooling fan continues to run,
the oven light goes out, and the sym
-
bols flash.
To continue the process:
^
shut the oven door,
^
and press the Start/Stop button.
The oven light comes on again and the
symbols light up constantly.
Switching off the appliance
The cooling fan prevents a build-up
of condensation in the warm appli-
ance. Leave the cooling fan on until
the oven has cooled down suffi-
ciently.
^
Turn the function selector and the
temperature selector to "0". This will
also turn off the cooling fan.
Using combination programmes
28