Filter
Top Products
Building in and connecting to
services
a Oven
b Building-in recess with full depth
floor panel
c Inlet for mains connection cable to
the appliance
d Isolator switch position. This should
preferably be located in the housing
unit to the right of the appliance. (Do
not locate the isolator switch behind
the appliance).
e Mains connection cable
f Mains connection cable loop
g Cover panel, behind which the termi-
nals in the appliance are located.
h Filler strip HAL 90
Filler strip h is only required when
fitting an H 399 B into a base unit. It
is available to order through the
Spare Parts Dept.
^
The filler strip is secured, as illus
-
trated, to the underside of the
worktop inside the building-in recess.
^
Turn off the power supply at the isola
-
tor switch. See "Electrical connec
-
tion".
^
Open cover panel g and connect
mains connection cable e to the iso
-
lator switch d, and then to the termi
-
nal block in the oven a.
See "Electrical connection" for connec
-
tion diagram.
H 399 B
5
478
h
516
473
478
44
30