Filter
Top Products
Light
The oven interior lighting can be set so
that it goes out 15 seconds after a
cooking programme has started, or so
that it stays on throughout cooking.
If this option has been set, the lighting
can be switched back on for a further
15 seconds by pressing one of the
sensors next to the display.
Main menu
The first four options in the main menu
can be allocated to functions or user
programmes which you use more
frequently than the pre-set functions.
Each option is shown as a position and
can be changed. You can select other
options from the range of functions and
also your user programmes.
You can change to the position required
by confirming "Continue" even if no
changes have been made.
Catalyser
The oven is supplied with the catalyser
engaged for all functions except Gentle
bake.
If the catalyser is set to:
–
"On" it will also work during Gentle
bake.
–
"Off next programme only" it will be
switched off during the next
programme but only if a temperature
of over 150 °C is reached. If this
temperature is not reached, the
setting will apply to the following
programme too.
–
"Factory default" the settings the
oven was supplied with will be
re-instated.
Cooling fan run-on
The cooling fan will continue to run for a
while after the oven has been switched
off to prevent any humidity building up
in the oven, on the control panel or in
the oven housing unit.
The cooling fan is sensor controlled
and will switch off automatically.
You can change the factory default
setting and set the cooling fan to switch
off when the temperature in the oven is
below about 70 °C or to switch off after
a period of about 25 minutes.
Do not leave food in the oven to
keep it warm if you have set the
cooling fan to timed operation.
Moisture levels in the oven could
increase, leading to condensation
forming on the control panel and
surrounding kitchen furniture and
drops of moisture collecting under
the worktop.
Condensate can
– damage the housing unit /
worktop.
– lead to corrosion in the oven.
Changing settings
30