Filter
Top Products
Heating phase
The heating phase can be changed
with the Fan plus U, Conventional
heat V and Auto roast [ functions.
–
Rapid
(Factory default)
All the heating elements are
switched on together in order to heat
the oven up as quickly as possible to
the required temperature.
–
Normal
Only the heating elements for the
cooking function selected are
switched on.
Recommended temperatures
If you frequently change a
recommended temperature it may be a
good idea to change it permanently.
All of the functions which allow a
temperature change are listed.
When you select a function the
recommended temperature is
highlighted.
The setting range selectable with the
temperature selector will also appear.
Display
Contrast
The contrast is represented by a bar
with seven segments, where one
segment is filled in.
Factory default: NH H H TTTTT H H HN
To change the setting, move the solid
segment to the left or right with the ? or
; sensor.
Brightness
The brightness is represented by a bar
with seven segments, where one
segment is filled in.
Factory default: NH H H KKKKK H H QN
To change the setting, move the solid
segment to the left or right with the ? or
; sensor.
Volume
Buzzer tones
The volume of the buzzer is
represented by a bar with seven
segments, where one segment is filled
in.
Factory default: NH H H KKKKK H H QN
To change the setting, move the solid
segment to the left or right with the ? or
; sensor.
If none of the segments is filled in, the
buzzers are switched off.
Settings
36