Filter
Top Products
To cancel the residual moisture
evaporation process
If you select "Moisture plus" or one of
the Automatic programmes with
Moisture plus, the prompt to evaporate
residual moisture will appear.
^
Touch the ; oder ? for at least 3
seconds.
The evaporation process will be
cancelled.
^
The cooking programme can now be
started.
Do not cancel the prompt for
residual moisture evaporation too
often, as this might cause the steam
unit to overflow when taking in more
water.
Descaling
The oven will need to be descaled
depending on the number of cooking
programmes using Moisture plus which
have been run and the amount of water
taken into the oven for these. A
message to tell you to descale the
appliance will appear in the display.
The steam injection system should be
descaled regularly. How often this
needs to be done will depend on the
water hardness level in your area.
You can start the descaling process at
any time by selecting the Moisture plus
function and then "Descale".
You cannot use the oven until you have
carried out the descaling process.
See "Cleaning and care" for more
information about descaling.
Moisture plus
38