Miele HG01 Dishwasher User Manual


 
The included toekick will fit without
modification if the machine is set to its
maximum height and the toekick is re
-
cessed as far as possible (4" / 10 cm).
If the machine height is less than maxi
-
mum, or if the toekick is not recessed 4"
(10 cm), the toekick must be shortened.
The rear of the toekick has two cutting
lines.
^
Screw the toekick onto the installed
brackets, with the cutting lines to-
wards the top, and pull out evenly
and slowly until it aligns with the
toekick of the adjoining cabinets.
The toekick can not be pushed
back in once it has been extended.
It must be unscrewed, so that the
tension on the spring clips can be
released. The brackets can then
be pushed in, and the toekick reat
-
tached.
Installation
38