Miele K 12010 S-2 Refrigerator User Manual


 
Moving the shelves
The shelves in the refrigerator section
can be adjusted according to the
height of the food.
^
Raise the shelf, and pull it forwards
slightly until the notch at the side is in
line with the shelf support. It can then
be raised or lowered to the required
level.
^
The raised edge at the back must
face upwards to prevent food from
touching the back of the appliance
and freezing to it.
Stoppers prevent the shelves from
being dislodged by mistake.
Split shelf
(depending on model)
In order to accommodate tall items in
the appliance, one of the shelves is
divided. The front section can be
pushed under the rear section.
^
Push the rear half of the glass shelf
up slightly from below.
^
At the same time, pull the front half of
the glass shelf forwards slightly and
then push it carefully under the rear
half.
Adjusting the door shelf/bottle
shelf
^
Push the door/bottle shelf upwards,
then remove it by pulling it forwards.
^
Replace the door/bottle shelf at the
required position. Ensure that it is
securely pushed back into position.
Adjusting the interior fittings
25