Filter
Top Products
Attaching the fixing brackets
(Only for appliances using the "Front
panel gap kit".)
The fixing brackets are used to secure
the custom door front to the bottom of
the appliance door.
^ Open the appliance door all the way.
^ Slightly loosen the screw (1.).
^
Position the fixing bracket on the
appliance door (2.) and pre-drill a
hole in the custom door front.
^
Screw the fixing bracket securely to
the custom door front (3.).
^
Tighten the screw (4.).
^
Put the cover on the bracket (5.).
The number of lower brackets will
depend on the width and the design of
the custom door.
Attaching the covers
^ To mount the cover strips on both
sides of the door, click them into
place from bottom to top, into the
gap between the appliance door and
the custom door.
^
Screw the brackets onto both sides
of the appliance, to hold the cover
strip.
Installing the appliance
59