Filter
Top Products
MasterCool control panel options for RemoteVision
Selectable
options
Description of function
; - Back
; 2 Reboot the module
; 3 Reset the module to factory settings
; 4 Enter Ad-Hoc Mode
Note: If you cannot select any option (other than ; - "back"), the module has not
been installed correctly.
Status indicators Description of function
Flashing ; ~ Module booting phase
Flashing ; | Connection to router established, no IP address assigned
Flashing ;< In Ad-Hoc Mode, not connected
Solid ;= In Ad-Hoc Mode, connected
Flashing ; ‡ No connection to Network
Solid ; # Connected to Network
RemoteVision
74