Miele KFN12923 SD Refrigerator User Manual


 
Dynamic cooling m
When the Dynamic cooling function is
not switched on, the natural circulation
of air in the appliance will cause
different temperature zones in the
refrigerator as the cold, heavy air will
sink to the lowest section of the
appliance. You should bear this in mind
when placing food in the appliance
(see "Using the refrigerator efficiently").
However, if you are placing a large
amount of food in the refrigerator at any
one time, it is a good idea to switch on
Dynamic cooling. This way you can
distribute the temperature inside the
appliance to all areas more evenly so
that all the food will be chilled to about
the same degree.
The temperature is set as normal with
the temperature control.
Dynamic cooling should also be
selected when:
the ambient temperature in the room
is high (above approx. 30 °C), and
the room humidity level is high.
Switching on Dynamic cooling
^
Press the Dynamic cooling button.
The Dynamic cooling indicator light
will come on.
Make sure the fan at the back of the
appliance is not restricted to ensure
unhindered air circulation.
Switching off Dynamic cooling
^
Press the Dynamic cooling button
m. The Dynamic cooling indicator
light will go out.
The fan automatically switches off
when the door is open.
Super freeze and Dynamic cooling
19