Miele KFN 8993 SDE ED Refrigerator User Manual


 
This appliance complies with all
applicable safety laws and
regulations. However, improper use
can result in personal injury and
material damage. These operating
instructions contain important
information on the safe installation,
operation, and care of your
appliance. To avoid the risk of
personal injury or damage to the
appliance, is is important that you
carefully read the instructions. Keep
them in a safe place and pass them
on to any future user.
Correct use
~
This appliance is intended for
domestic use only, specifically for the
cool storage of food and drinks, for
freezing fresh food, for storing frozen
food, and for making ice. Any other use
is not permitted, and could be
dangerous. The manufacturer will not
be held liable for damage caused by
incorrect use of any kind.
Technical safety
~
This appliance contains the coolant
R134a, which is an environmentally
acceptable, non-flammable
hydrofluorocarbon (HFC). It does not
damage the ozone layer. For more
information on the coolant, refer to the
information plate posted on the inside
of the refigerator section. When
transporting and installing the
appliance, care must be taken not to
damage any part of the cooling system.
If damage does occur: - unplug the
appliance from the socket, - air the
room where the appliance is, for
several minutes, - contact the Miele
Service Department for advice.
~
Before plugging in the appliance,
you must make sure that the electrical
rating (voltage and frequency,
indicated on the model plate)
corresponds to the household electrical
supply. These ratings must match, in
order to avoid damaging the
applicance. If in doubt, please contact
a qualified electrician.
~
The electrical safety of this
appliance can only be guaranteed
when there is proper grounding that
complies with applicable safety
regulations. Is is very important to make
sure that this essential safety
requirement is met. If there is any doubt
about the grounding of your household
wiring system, have it inspected by a
qualified electrician. The manufacturer
will not be held liable for damages
resulting from an inadequate grounding
system (for example, electric shock).
Safety information and warnings
7