Filter
Top Products
Overheating/pan protection
Each zone is equipped with an overheating protection
mechanism (internal temperature limiter).
The ExtraSpeed cooking zone is also equipped with pan
protection. If you wish to use it you will need to alter the
setting (see "Programming / Pre-heat").
If the heating element switches on and off even when the
highest power level is selected, this indicates that the
overheating protection mechanism has triggered.
The cooking zone heating element switches off when the pan
protection mechanism is activated. 9 alternating with 0 will
appear in the display.
^ Touch the sensor for selecting the cooking zone you want.
The display changes and only 0 flashes. You can now use
the hob again.
Overheating can be caused by:
– a cooking zone being switched on without a pan on it.
– heating up an empty pan.
– the base of a pan not sitting evenly on the cooking zone.
–
the pan not conducting heat properly.
Safety features
47