Filter
Top Products
,WARNING:
Disconnect the appliance from the
main power supply before servicing.
To reduce the risk of electric shock,
make sure that the appliance is
properly grounded after installation.
To guarantee the electrical safety of
this appliance; continuity must exist
between the appliance and an
effective grounding system. It is
imperative that this basic safety
requirement be met. If there is any
doubt, have the electrical system of
the house checked by a qualified
electrician. The manufacturer cannot
be held responsible for damages
caused by the lack, or inadequacy
of an, effective grounding system.
All electrical work should be
performed by a qualified electrician
in accordance with local codes and
the:
- National Electrical code
ANSI / NFPA No. 70-1481
for USA
or
- Canadian Electrical Code Part I
(CSA Standard C 22.1)
for Canada
Note to the installer:
Please leave these instructions with the
consumer.
Power supply:
–
240 V, 60 Hz, 15 A fuse rating
or
–
208 V, 60 Hz, 15 A fuse rating
The oven is equipped with a power
cord consisting of 3 leads. They must
be connected to a dedicated line
through the use of an approved
junction box
Black : connect to L1 (hot)
Red: connect to L2 (hot)
Green: connect to GND (ground):
For further information, see the
wiring diagram provided with the
appliance.
WARNING:
THIS APPLIANCE MUST BE
GROUNDED
Electrical connection
14