Filter
Top Products
Switching off and residual heat
indicators
To switch off a cooking zone:
^
Touch the - and + sensors for the
zone you want to switch off at the
same time.
A 0 will light up in the display for that
zone for a few seconds. If the cooking
zone is still hot, residual heat will then
be indicated in the display.
To switch off the hob:
^ Touch the ON/OFF sensor s.
This switches off all cooking zones. The
residual heat indicator will appear in the
display of any cooking zone which is
still hot.
The lines of the residual heat indicator
go out one after another as the cooking
zones cool down. The last horizontal
line only goes out when the cooking
zone is safe to touch.
The residual heat indicators also
react to hot dishes and plates being
placed on a cooking zone that is not
switched on.
Do not touch any zone or place any
heat sensitive items on a zone where
the residual heat indicator is lit up.
Danger of burning, and fire hazard.
Please note that the residual heat
indicators do not light up when there
is a fault message, even if the
cooking zones are hot.
Operation
33