Filter
Top Products
You can change the standard settings
of your hob (see chart).
Proceed as follows:
^
With the hob switched off, touch the
hob ON/OFF sensor s and the safety
lock sensor $ at the same time until
the indicator lamp for the safety lock
flashes.
A P (Programme) and an S (Status) will
appear in the cooking zone display with
a number which shows the current
setting (see chart).
^ To select the programme you want,
touch the + or - sensor for the front
left cooking zone, then select the
required status by touching the + or -
sensor for the front right cooking
zone (see chart). You can alter
several programmes one after the
other in this manner.
To store the new settings in memory,
touch the hob ON/OFF sensor s until
the displays go out.
If you do not wish to store the settings
in memory, touch the safety lock sensor
$ until the displays go out.
Programming
43