Filter
Top Products
Problem Possible cause Remedy
The sensors are
over-sensitive or do not
react at all.
The sensitivity level of
the sensors has
changed.
Make sure that there is no
direct light (from the sun or
from an artificial source)
falling onto the hob and that
the surrounding area is not
too dark.
Make sure that there is
nothing covering the sensors
or the hob. Take any pans off
the hob and wipe away any
food deposits.
Interrupt the power supply to
the hob for approx. 1 minute.
If this does not solve the
problem, please call the
Miele Service department.
FE flashes alternately
with numbers in the
timer display.
FE 44 The overheating
protection mechanism
has triggered.
See "Overheating protection".
FE 47 The fan is either
blocked or faulty.
Make sure it has not been
blocked by something like a
fork. Remove the cause of
the blockage. If the fault
message appears again, call
the Miele Service
Department.
FE 48
Other fault messages
FE..
A fault with the
electronics has
occurred.
Interrupt the power supply to
the hob for approx. 1 minute.
If the problem persists after
reconnecting the appliance
to the power supply, please
contact the Miele Service
department.
Problem solving guide
53