Miele KM6351 Appliance Trim Kit User Manual


 
Signing off the hob
If you want to sign off from the Miele{home system, first
prepare the signing off procedure on the master appliance
(see the "Miele|home" fitting and installation instructions).
^
With the hob switched off, touch the s and $ sensors at
the same time until the safety lock indicator lamp flashes.
After programming mode has been called up, P (Programme)
and S (Status) will appear in the timer display.
The programme number will appear on the left of the
numerical keypads and the status currently set will appear on
the right of the numerical keypads.
^
Touch number 1 on the rear left numerical keypad (set
Programme 10).
^ Touch number 1 on the front right numerical keypad (set
Status 1 = Signed off).
The signing off process will begin and the number 1 will flash
in the front right numerical keypad. The signing off process
will take a few minutes. The number 1 will light up constantly
when the process has been completely successfully.
^ To save the setting, touch the s sensor until all the
displays go out.
^
Proceed as described in the "Miele|home" or Con|ctivity
fitting and installation instructions.
Con|ctivity and Miele|home
59