Filter
Top Products
... one of the following faults has
occured:
–
The Booster function has
automatically switched off early.
–
The selected power setting of 9
flashes alternately in the display with
the 8.
–
A 0 flashes in the display for all
zones.
The overheating protection mechanism
has been triggered (see "Overheating
protection").
... the food in the pan hardly heats up
or does not heat up at all when the
Auto heat-up function is switched on
This could be because:
– the pan is not conducting heat
properly
– there is too much food in the pan.
Select a higher continued cooking
setting next time or start cooking at the
highest setting and then turn down to a
lower setting manually later on.
... the cooling fan continues to run
after the appliance has been
switched off.
This is not a fault. The fan will continue
running until the appliance has cooled
down. It will then switch itself off
automatically.
Problem solving guide
29