Filter
Top Products
If the cooling elements overheat:
The cooking zone cooling elements can
overheat if the appliance does not have
sufficient ventilation.
The overheating protection affects the
whole hob in one of the following ways:
–
If the Booster is operating it will be
switched off.
–
If power setting 9 has been set, the 9
will flash, alternating with the 8,i.e.
the cooking zone power level has
been reduced to 8.
– All cooking zones switch themselves
off automatically and the displays
show a flashing 0.
As soon as the cooling elements have
cooled down sufficiently, the cooking
zones will automatically continue to
operate at the power setting previously
selected.
Note:
^
If a drawer is fitted directly
underneath the hob, ensure that
there is sufficient space between the
drawer and its contents and
underside of the appliance in order to
ensure sufficient ventilation for the
hob.
^
If the overheating protection is
activated again contact the Service
Department.
Operation
25