Filter
Top Products
Switching between timer
functions
If you are already using the timer for
one function and you also wish to use
the other function, touch the m sensor.
The timer display will go out. Now
proceed as before.
To check the remaining time of the
function not displayed, touch the m
sensor once.
Timer default setting
The timer is set at the factory so that it
starts with 01 or 99 when the + or -
sensor is touched.
This setting can be adjusted so that the
time you last used appears in the
display when you press + or - (see
"Programming - P4.").
Example:
If P4. is set to S1, and the last time the
minute minder was used it was used for
5 minutes, 00 will appear in the display
when you switch on. When you touch +
or -, the display will change to 05.
You can still select any time you want,
even if you have adjusted the timer
default setting.
Timer
38