Filter
Top Products
Booster function
All of the cooking zones are equipped
with a booster function, i. e. an increase
in the power level.
If activated, the zones will operate on
power setting 9 with an extra boost of
power for a period of 10 minutes. This
booster is intended for quickly bringing
large quantities of water to the boil, e.g.
when cooking pasta.
A maximum of two booster functions
can be used at any one time.
Taking a pan off the zone whilst the
booster is in operation interrupts the
booster function. It will resume if a pan
is placed back on the zone within 3
minutes.
The extra boost of energy is only
available by taking a proportion of
energy away from another cooking
zone. For this reason, the cooking
zones are networked in pairs as shown.
When the booster is switched on, the
following happens:
–
if Auto heat-up is activated on either
zone in the same network, this will be
switched off.
–
the power level on the other linked
cooking zone will sometimes
decrease.
To switch the booster on:
^
Touch the sensor for the relevant
cooking zone.
^
Press the B sensor.
A P will start to flash in the display for
the cooking zone, and the indicator
lamp for the booster will light up.
After a few seconds, P will light up
constantly and the indicator lamp will
go out.
After 10 minutes, the zone will
automatically revert to power setting 9.
To switch the booster off:
^ Touch the sensor for the relevant
cooking zone.
^ Press the booster sensor switch B or
- for the relevant cooking zone.
If a power setting is selected before the
booster function is switched on, the
zone will revert to this pre-selected
power setting when the booster is
switched off, or automatically at the end
of the booster time.
Operation
22