Filter
Top Products
The cooktop turns off while in use, and a flashing F appears in the timer
display.
Possible fault Solution
One or several of the touch
controls are covered, for
example by fingers, food
boiling over or by an object.
Clean the control panel or remove the object
(see "Safety shut-off".)
Auto-heat is turned on, but the food does not start cooking.
Large amounts of food are
being heated.
Start cooking at the highest power level, then
reduce the power level manually.
The cookware conducts heat
poorly.
See "Selecting cookware".
One or several residual heat indicators are flashing.
There was a power failure
during operation, and the
cooktop shut itself off.
Not a fault.
Restart the cooktop.
The residual heat indicators
have lit up during
programming.
Not a fault.
The display flashes until the maximum residual
heat has expired or the burner is selected and
activated.
Frequently asked questions
34