Miele KM 5993 Cooktop User Manual


 
Timer
The timer can be used for two different
functions:
setting a minute minder
to set a cooking zone to switch off
automatically.
You can set times from 1 minute (01)to
9
1
/
2
(9.^) hours. Half-hours are
indicated by a dot following the
number.
Times of more than 99 minutes (99) are
set in half-hour steps.
Use the - touchpad to reduce the time
from 9.^ to 00, and the + touchpad to
increase the time from 00 to 9^.The
display stops at 2h and at 99. To
continue entering the setting, briefly
remove your finger from the sensor and
then touch it again.
For all functions, 00 will appear in the
Timer/Memory display for a few
seconds, while a signal sounds at the
same time. If you would like to switch
off the acoustic tone early, simply touch
the m touchpad.
Setting the minute minder
You can set the timer whether the
cooktop is switched on or off.
^
Touch the m, - or + sensor.
00 appears in the Timer/Memory
display.
^
Touch the - or + touchpad until the
desired amount of time appears, for
example 15 minutes.
The time set then counts down in
1-minute decrements. You can read the
remaining time from the display, and
adjust it at any time using - or +.
Canceling the minute minder
^ Touch the - and + sensors at the
same time.
Timer and Memory function
27