Miele KM 6367 Cooktop User Manual


 
Overheating protection
All the induction coils and the cooling elements for the
electronics are fitted with an overheating protection
mechanism. Before the induction coils or cooling elements
get too hot, the overheating protection mechanism cuts in in
one of the following ways:
If the booster function is being used, this will be switched
off.
The power level will be reduced.
The cooking zone will switch off automatically.
"E2" appears in the cooking zone display.
You will be able to use the cooking zones again as usual
when the fault code has gone out.
The overheating mechanism can be triggered by:
Heating up an empty pan.
Fat or oil being heated up on a high power level.
Insufficient ventilation to the underside of the appliance.
A hot cooking zone being switched on after a power cut.
If the overheating protection mechanism triggers again,
contact the Service department.
Safety features
38