Filter
Top Products
The appliance is supplied right hand
hinged. If left hand door hinging is
required, follow the instructions below.
It is essential that the changing of
the door hinging is carried out by
two people.
In the following illustration the doors
are not shown in the closed position
to make it easier to see what
happens next.
^
Close the lower appliance door.
^
Undo screw a on the lower door
bearing b.
^
Open the lower door carefully, and
pull it upwards and off.
^
Take hinge pin c out of the door
bearing and place to to one side.
^
Unscrew door bearing b and screw
it into position on the opposite side.
^
Remove cover d and refit on the
opposite side.
^ With the upper door closed, pull
hinge pin e downwards to remove it.
^ Open the upper door carefully, and
pull it downwards and off.
^ Take care not to lose the washers.
^ Remove cover f, and unscrew hinge
bracket g.
^
Refit bracket h and cover i turned
through 180° on the opposite side.
^
Screw hinge bracket g into the
opposite side.
Changing the door hinging
39