Miele KWT1601SF Beverage Dispenser User Manual


 
Bottle display rack
The display rack, allows you to display
selected bottles so they can be seen
even with the door closed.
^ Lay the wine bottles in the display
rack, so that they touch the wooden
guide-rail a.
^ To remove the display rack pull it up
and out, then attach it to the rear
position on the wooden rack b.
The bottles can now be stored on the
wooden rack in the usual manner.
Additional display racks are
available from Miele.
The display rack can only be attached
to wooden racks with wide cross-ties. In
the upper temperature zone, these are
found in the lower position. In the lower
temperature zones, they are found in
both the upper and lower position.
It is recommended that the wooden
racks always be left in the pre-set
positions. This makes optimal use of
the interior space.
Never stack bottles on the wooden
racks. Only the bottom-most level in
each temperature zone can support
a stack of bottles (remove the
wooden rack).
Maximum capacity
The unit can hold approx. 102 bottles
(0.75 l).
Storing wine
22