Miele KWT1611SF Beverage Dispenser User Manual


 
Display lighting
The display lighting can be turned on if
you wish the bottles to be lit up even
when the door is closed.
Turning on
^
Touch the access button "p"soit
turns yellow.
^ Touch the "Display light" sensor
button so that it turns yellow.
The display lighting will now remain on
in the 2 lower temperature zones, even
when the door is closed. When the door
is open, the interior lighting also comes
on in all three temperature zones.
Turning off
^
Touch the "Display light" sensor
button so that it turns white.
The display lighting is now turned off.
When the door is closed, the interior is
dark, and when the door is opened the
interior lighting comes on.
Duration of the display lighting
The display lighting is factory pre-set
to 30 minutes.
^
To change this time setting, press
and hold the "Display light" sensor
button for 2 seconds.
The set time (in minutes) appears in the
display:
Use the X and Y buttons next to the
display to change the duration of the
lighting in increments of 15 minutes.
You can set the lighting to last for 15,
30, 45, 60, 75 or 90 minutes.
^ To confirm the setting touch the
access button "p" until all the displays
go out.
If the door is closed before the set
time is completed, the lighting
duration starts over again from the
beginning.
Storing wine
23