Filter
Top Products
Approx. 5 seconds after releasing the
button, the current temperature inside
the applicable zone will be
automatically shown.
The two temperature zones are cooled
alternately, which means that
(depending on the quantity of wine
being stored) it can take several hours
for the required temperature to be
reached, and for the temperature
display to adjust. If, after this time, the
temperature is still too high or too low,
you will need to adjust it again.
Temperature range
The temperature can be adjusted from
5°C to 18°C (41°F - 64°F).
Temperature display
During normal operation, the
temperature displays on the control
panel show the temperatures inside the
appliance.
The temperature display will flash if
–
a different temperature is being set,
–
the temperature in one of the zones
deviates by more than 5 °C from the
set temperature.
Temperature display brightness
The appliance is supplied with the
brightness of the temperature display
set as low as possible.
You can adjust the brightness of the
temperature display as follows (both
temperature displays will be adjusted
together):
^
Press and hold in the constant
humidity button for approx. 5
seconds.
The constant humidity indicator light will
flash, and a
; will flash in the
right-hand temperature display.
^ Repeatedly press one of the left-hand
temperature selector buttons for the
upper zone until:
^ appears in the display.
^
Press the constant humidity button
again.
^ lights up in the display.
^
You can now adjust the brightness
level by pressing the temperature
selector buttons for the upper zone.
You can choose from settings 1 to 5:
1: lowest setting,
5: brightest setting.
Optimum temperature and humidity
13