Filter
Top Products
To reduce the risk of electrical
shock, disconnect the appliance
from the power supply by shutting
off the power main, tripping the
circuit breaker or unplugging the
power cord before maintenance.
Never use cleaning agents
containing abrasive substances
such as sand, soda, acids,
chlorides or chemical solvents.
Non-abrasive cleaning agents are
also unsuitable, as they can cause
matte areas to appear.
Stainless steel surfaces can be
cleaned using a non-abrasive
stainless steel cleaner (available
from Miele).
Only use a mild solution of warm
water and liquid dish soap to clean
this appliance.
Do not use a steam cleaner to clean
this appliance. Pressurized steam
could penetrate electrical
components and cause a short
circuit.
Do not allow water to get into the
electronic unit or lights.
The data plate located inside the
appliance must not be removed. It
contains information which is
required in the event of a service
call.
To better maintain your appliance
avoid the following:
–
cleaners containing soda, ammonia,
thinners, or chlorides
–
solvent based cleaning agents
–
stainless steel cleaners
–
cleaners containing descaling
agents or lime removers,
–
abrasive cleaners,
–
dishwasher soap (powder),
–
caustic (oven) cleaners,
– scouring pads, steel wool, hard
brushes,
– glass cleaners,
– metal scrapers,
– eraser sponges,
– steam cleaning products.
Glass cleaners may be used to
clean the exterior. However do not
allow them to sit or "puddle", this can
cause damage to the surface.
Remove the cleaner promptly.
Cleaning and care
24