Mistral MPM15 Popcorn Poppers User Manual


 
Congratulations on the purchase of your new
Party Fun Popper! You can now make popcorn
for your friends or the whole family in a
matter
of minutes.The easy way to make
your favourite type of popcorn.
How to Make Popcorn
1 Switch off the machine and remove the lid .
2 Fill the supplied measuring cup with popping corn
(60
g).
3 Pour the popping corn into the popping chamber.
Note: NEVER put less than 1 measuring cup of corn
kernels in the chamber.The maximum quantity that
can be added is 2 measuring cups (120g).
Note: Sugar,oil, butter,salt, margarine or any other
ing
redients must not be put into the popcorn
chamber,since this could damage the machine.
4 Place the lid on the base of the popcorn maker. Place
the
measuring cup / butter-melting bowl in position
over the hole at the top of the cover (this prevents
popped
corn ejecting from the top of the unit).
5 Place a large heat resistant bowl underneath the
chute, to collect the cooked popcorn.
6 Plug into the power outlet and switch on.The
indicator
light will illuminate, the motor will run and
the
chamber will heat up.
Note: NEVER leave the machine unattended while in
use
. Please note: the lid of cover heats up during
operation.Do not touch.
7 Switch off and unplug when the popcorn is cooked
(app
roximately 3 minutes)
8 Remove any unpopped kernels of corn before you are
ready to make a new batch of popcorn. Please note:
the
lid heats up during operation. Leave the appliance
to
cool down in order to avoid the risk of burns.
9 After two consecutive batches have been made, allow
the
machine to cool down for about 10 minutes.
The machine is equipped with an automatic overheating
protection mechanism. It automatically switches off in
the
case of overheating and restarts once the normal
ope
rating temperature has once again been reached.
If you wish to add melted butter:
The measuring cup doubles as a butter melting bowl.
1 Put 2 – 3 teaspoons of butter or margarine in the
butte
r-melting bowl before you switch on the
popcorn
machine.The butter will melt whilst the
popcorn
is being cooked. Simply pour it over the
popcorn
in the serving bowl.
DO NOT melt any butter or margarine in the popcorn
chamber.The popcorn maker is a hot-air device.
Putting
any other ingredients into the chamber will
damage the unit and may cause injury.
2 Pour melted butter/margarine over the popcorn.
3 Stir.
4 Sprinkle with sugar,icing sugar or salt, as desired.
Cleaning and maintenance of
your popcorn maker
Ensure that the popcorn maker has been switched off
and
unplugged from the power outlet before you
commence
cleaning. NEVER immerse the machine in
water, cleaning agent or any other liquid.
Clean
the surface with a damp cloth. Do not use scouring
agents or solvents to clean the popcorn maker.
If
necessary, the cover and measuring cup may be
washed in warm, soapy water. Dry well and replace.Do
not
place in the dishwasher.
2
Important safety advice for your popcorn
ma
ker
Parts of the appliance heat up during use. In order to
avoid the risk of burns, DO NOT touch these hot
sur
faces!
Allow the appliance to cool before cleaning.
Do not add any ingredients such as sugar, oil,butter,
salt
, margarine etc. to the popcorn chamber, as this
could
damage the machine.
Before each use, ensure that the lid and the
measu
ring cup that doubles as a cover,are in their
cor
rect positions.
Never switch on the appliance when empty.
Do not use the popcorn maker for longer than 6
mi
nutes at a time.After two consecutive batches
have been made, leave the machine to cool down for
about
10 minutes before using again.
Do not use this appliance for anything other than its
intended
use.
Operate on a dry, level surface; sinks, drain boards or
uneven
surfaces must be avoided.
Do not use microwave popcorn: use only traditional
popping
corn kernels.
Note: Popcorn is produced when corn kernels quickly
turn
inside out and expand.During this process it is
normal
for some unopened kernels to be ejected
from the chute. Please be aware of this and keep
children away from the corn chute whilst the
ma
chine is operating. Never allow children to stand
near the front,or sides of the chute.
FAILURE TO OBSERVE THESE CAUTIONS MAY RESULT
IN DAMAGE TO THE APPLIANCE.
COMPULSORY WARNING
Save These Instructions
1
When using electrical appliances, in order to reduce the risk of fire, electric shock and/or injury, these basic
safety precautions should always be followed:
Important Safeguards
Read these operating instructions and safety advice
carefully and in full before you use the popcorn
maker. Keep these instructions in a safe place.
Do not use outdoors. Store the unit indoors in a dry
location.
This appliance is intended to be plugged into a 240V
outlet only.
This machine is not suitable for commercial use; it is
for household use only.
Never immerse the appliance or power cord in water
or any other fluid: this could result in electric shock,
fire or injury.
Do not use the appliance if it is damaged or
defective. Do not use the appliance if the power cord
or plug are damaged. NEVER repair the machine or
the power cord yourself.
Do not attempt to repair, disassemble, or modify the
appliance. There are no user-serviceable parts.
To remove the plug from the power outlet, grasp the
plug and pull it from the power outlet. Never pull
cord.
Don’t carry the machine by the power cord and
don’t drag the power cord past sharp edges.
Do not allow the cord to hang over the edge of a
table, or touch hot surfaces.
This appliance is not intended for use by young
children or infirm persons unless they have been
adequately supervised by a responsible person to
ensure that they can use the appliance safely.
Young children should be supervised to ensure that
they do not play with the appliance.
Never leave the appliance unattended when in use.
Do not use the appliance with an extension cord.
Do not misuse the cord.
Do not use popcorn maker close to hot surfaces.
The use of attachments or accessories not
recommended or sold by the manufacturer can cause
fire, electric shock or injury.
Do not reach for an appliance that has fallen into
water. Switch off at the power outlet and unplug.
If the supply cord is damaged, the cord must be
replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
This product has not been designed for any uses other
than those specified in this booklet.