Filter
Top Products
MR-385R-A MR-420R-A MR-455R-A
MR-385R-A(NZ) MR-420R-A(NZ) MR-455R-A(NZ)
Unplug the power cord before prepairing and servicing
1. Remove parts insider the Freezer room
(1) Photo 1st Remove Crystal shelf Freezer,
Fan Grille
(2) Photo 2nd Remove scews for closing Lead cover F,
Remove 2 Rivets From Fan grille
(3) Photo 3rd Cut binder, remove poly bag, Take off
connector lead wire.
Fan motor
(4) Photo 4th Remove Fan motor after remove fan and
remove screw out of fan motor base.
Defrost thermal fuse and Freezer thermistor
(5)
Photo 4th Remove fan grille out of bell mouth, remove
the connector and plug to take out the thermal fuse and
thermistor freezer.
Defrost heater and Drip tray
(6)
out of base after remove heater cover plate and drip tray
Caution on assembly
(7) 1. Insert the fan into the base of fan motor's shaft, check
if the fan rotates with your finger.
2. When inserted drip tray to effect to slacken the lead
wire of defrost heater in order to prevent water from
entering the glass tube.
3. Attach defrost thermistor with muffler and lighten the
binder.
- 20 -
PHOTO
DISASSEMBLY INSTRUCTIONS
Photo 5th Lift up evaporator and remove the defrost heater
Ice corner tray assy, Ice tray, Ice box
7
OPERATION PROCEDURE
Photo 1
Photo 5
Photo 2
Photo 3
Photo 4
Crystal shelf F
Ice box
Ice corner tray assy
Ice tray
Screw
Lead cover F
Rivets
Binder
Bag
Connector lead wire
Fan motor
Fan grille
Evaporator
Defrost heater
Def thermistor
Heater cover
Drip tray
Screw
Bell mouth
Thermal fuse