Filter
Top Products
Installation Instructions
REMOVE FREEZER DOOR
Tape the door shut with masking tape.
Remove the hinge pin from the hinge bracket.
This will be used again with the new hinge
bracket for the other side.
Remove the tape and tilt the door away
from the cabinet. Lift the door off the bottom
hinge pin.
Remove the button plug from the left side of
the door. Remove the door thimble from the
right side of the door. Install the door thimble
into the hole on the left and the button plug
into the hole on the right.
Set the door on a non-scratching surface, with
the inside up.
2
REVERSING THE DOOR SWING (cont.)
TRANSFER CENTER HINGE BRACKET
Using a 5/16″ socket ratchet/driver, remove
the bolts securing the center hinge bracket
to the cabinet.
3
A
REMOVE BOTTOM HINGE AND
LEVELING LEG
Using a 1/2″ socket ratchet/driver, remove
the nut and hinge pin from the hinge bracket
with leveling leg. Using a 5/16″ socket ratchet/
driver, remove the screws from the bottom
hinge bracket. These will be reinstalled on the
other side.
Using a 5/16″ socket ratchet/driver, remove
the screws from the leveling leg bracket on
the other side. These will be reinstalled on
the opposite side.
4
A
B
A
B
C
D
E
14
Bottom hinge
bracket
Leveling leg
bracket
TRANSFER CENTER HINGE BRACKET (cont.)
Transfer the plug button and screw hole
cover in the hinge holes on the left side
to the right side.
Install the new center hinge bracket from the
kit on the left side.
3
B
C