Moffat MDW 542 Dishwasher User Manual


 
Control panel and functions
4
Programme/Cancel button
On-Off button
End light
In this fully integrated appliance the controls are located on the top of the door. When selecting a
washing programme, the door needs to be slightly open.
Never use the dishwasher if the electrical
supply cable and water hoses are damaged;
or if the control panel, work top or plinth area
are damaged such that the inside of the
appliance is freely accessible. Contact your
local Service Force centre, in order to avoid
hazard.
All sides of the dishwasher must never be
drilled to prevent damage to hydraulic and
electric components.
WARNING!
For electrical and water connection carefully
follow the instructions given in specific
paragraphs.
IMPORTANT!
Always remember that when performing
operations as:
- selecting a washing programme,
- deactivation/activation of the audible signals,
- setting the water softener,
the appliance MUST be in setting mode:
Press On-Off button, no programme lights
are illuminated and End light flashes =
appliance in setting mode.
Press On-Off button, a programme light is
illuminated and End light is illuminated with
fixed light = last performed programme
still set.
In this case the programme has to be
cancelled (see instructions “Cancel a
washing programme in progress”).
152952 66/0en 13-02-2006 17:05 Pagina 4