Filter
Top Products
Press button repeatedly to select the
“Cooking Duration” function. The relevant
pilot lamp
will start flashing. Then, proceed
as follows:
To set the duration time:
1. press button “ ” or “ ”.
2. After the setting is carried out, wait for 5
seconds: the "Cooking Duration" pilot lamp
will come on and the display will revert
to the time of day.
3. When cooking time is over, the oven will
be switched off automatically and an
acoustic alarm will be heard, while the pilot
lamp will start flashing. Turn the oven
function and the thermostat control knob
to zero.
To switch off the acoustic alarm, press any
button. NOTE: when doing this operation,
the oven will be operated again, therefore,
remember to turn the oven function and
the thermostat control knob to zero at the
end of the cooking time.
To cancel the duration time:
1. Press button
repeatedly to select the
“Cooking Duration” function. The relevant
pilot lamp will flash and the display will
show the remaining cooking time.
2. Press button “ ” until the display shows
“0:00”. After 5 seconds the pilot lamp will
go out and the display will revert to the time
of day.
“End of cooking” function
Thanks to this function, you can set the oven to
switch off automatically when a programmed
end of cooking time is over. Place food in the
oven, select a cooking function and adjust the
cooking temperature. Press button
repeatedly to select the “End of cooking”
function. The relevant pilot lamp
will start
flashing. Then, proceed as follows:
To set the End of cooking time:
1. press button “ ” or “ ”.
2. After the setting is carried out, wait for 5
seconds: the “End of cooking” pilot lamp
will come on and the display will revert
to the time of day.