Filter
Top Products
4
Before first use
• Before using the toaster for the first time
operate the toaster without bread. Note:
the bread carriage lever › will not stay
down unless the toaster is plugged in
and the wall switch is on. Ventilate the
room during this period.
• As with all new electric heating elements,
your toaster emits a ‘new’ smell when it
is first switched on. This is quite normal
and not a cause for concern.
Instructions for use
1 Use your toaster without bread, this will
burn off any dust which may have
accumulated during storage. Select the
desired level of browing (1 to 9). This
setting is indicated on the front of the
toaster by the blue LED. When the
browning control is rotated away from
the user the blue LED moves up the
strip. At the very top it is on setting 9
and towards the bottom its on setting 1.
The unit defaults to setting 3 when first
plugged in.
• For best results ensure the bread slices
are of even thickness, freshness and
size. Remember that stale bread toasts
more rapidly than fresh and thin bread
toasts quicker than thick. See additional
points for more information.
2 After selecting the desired level, place
your bread in the slots ‹ and depress
the bread carriage lever › downwards
until it locks.
3 After the set time has been reached the
bread will pop up automatically ready for
removal from the slots. The bread
carriage lever will have returned to its
upper position and the heating element
will have switched off.
• If the bread in your toaster becomes
jammed disconnect your toaster at the
socket, allow it to cool, then remove the
bread.
• When not in use, switch your toaster off
at the mains and remove the plug from
the socket.
WARNING: Do not wrap the cable
around the main body of the appliance
during or after use.
Using the re-heat button
If your toast has popped up and gone
cold, the toaster offers a re-heat facility. To
use, press the re-heat button ‚, then
depress the bread carriage lever. A red light
on the front panel will illuminate and the
toaster will operate for a short period
re-heating the bread.
Using the cancel button
If you wish to interrupt the toasting
process, press the cancel button fi. You
can also press any of the function buttons
fi, ‡, ·, ‚ to cancel toasting.
Using the frozen button
To toast frozen bread do not adjust the
browning control from your normal
preferred setting, place the bread normally
in the bread slots, press the frozen button
‡ then depress the bread carriage lever. A
red light on the front panel will illuminate.
44420 Rev 1 23/12/04 3:06 PM Page 4