Morphy Richards 48544 Blender User Manual


 
3
44
Unplug from the mains before twisting the
Blending Leg (3) to unlock from the Main Unit.
To clean the Blending Leg, rinse under running
water and clean with a damp cloth.
3
Hold the Beaker steady with your other hand
and press and hold the On/Speed Button (2) to
start. Move the Blade (4) through the food using
an up and down motion. Release the On/ Speed
Button to stop BEFORE removing from the food.
2
Place the Blending Leg into the food to be
blended. We recommend using the Beaker (10)
for the best results.
11
Insert the Blending Leg (3) into the Main Unit
(1) and twist to secure into place.
Your Hand Blender has 2 speed settings which
can both be used when blending food.
Press the On/Speed Button
(2) lightly to use the
hand blender on the slower speed setting.
Press the On/Speed Button fully to use the hand
blender on the faster speed setting.
WARNING: Your Hand Blender Set is designed
for intermittent use. Do not use continuously for
more than 1 minute. Allow to cool down for a
minimum of 5 minutes before further use.
Do not use continuously for more than 10
seconds when lifted out of food.
Speed Button Usage
Using your hand blender
Thank you for your recent purchase of this
Morphy Richards Hand Blender Set.
The hand blender set comes with a number of
attachments and a ‘quick twist’ connection
mechanism for safety.
Please read the instructions for information on
how to use each attachment thoroughly before
use.
Remember to visit www.morphyrichards.co.uk to
register your product’s two year guarantee.
Wash the Blending Leg (3) Beaters (6), Chopping
Blade
(8), Chopping Bowl (9), and Beaker (10)
in hot soapy water. Dry throughly before first use.
Do not immerse the Main Unit (1) Whisk Gearbox
(5) or Lid (7) in water.
No parts are dishwasher safe.
WARNING: Carefully unpack your hand blender
as the blades are very sharp.
Introduction
Before first use
48544 rev1_Layout 1 18/04/2012 09:58 Page 3