Filter
Top Products
7
• For blending and chopping, select a
slow speed for soft ingredients, increase
the speed if required to produce the
consistency required.
• Select a high speed for chopping or
blending hard ingredients.
Trouble shooting
If the mixer stops working check the
reset button has not popped out. This
happens due to overheating which is
caused by overloading the mixer.
Wait a few minutes for the mixer to cool
down and press the reset button back
in.
I.
Cleaning
Before cleaning and maintenance,
switch the appliance off and unplug it.
1 Remove all attachments. All attachments
can be washed in warm soapy water.
Ensure that they are thoroughly dried.
2 Wipe the outside of the mixer with a
damp cloth, then leave to air dry. Never
use abrasives or immerse in water.
3 Wash the bowl in hot soapy water. After
cleaning re-fit the bowl. This will keep
the mixer head mechanism covered.
4 Fill the blender with warm water, fit the
lid and goblet, then switch on to MAX
for 20-30 seconds. Empty then rinse.
Wipe then leave to air dry.
• Do not leave the blender in water to
soak or leave water in the blender.
Helpline
If you have any difficulty with your
appliance, do not hesitate to call us. We’re
more likely able to help than the store from
where you bought it.
Please have the following information
ready to enable our staff to deal with your
query quickly:
• Name of the product
• Model number as shown on the
underside of the appliance.
I
48980 Rev 1 18/2/04 5:01 PM Page 7