Filter
Top Products
3
• Do not overfill the blender. This could
cause damage to the motor. The 3A
fuse will blow if the blender is over
loaded. Replace fuse and do not
exceed the maximum recommended
volumes. Refer to the operating chart.
• Do not blend or mill for longer than the
time periods recommended in the
operating chart.
• When using the blender or mill ensure
the lid is in place before switching on
and do not remove the lid until the
blade has stopped rotating.
Electrical requirementsElectrical requirements
Electrical requirementsElectrical requirements
Electrical requirements
Check that the voltage on the rating plate of
your appliance corresponds with your house
electricity supply which must be A.C.(Alternating
current).
If the socket outlets in your home are not
suitable for the plug supplied with this appliance
the plug should be removed and the appropriate
one fitted.
IMP0RTANT : THE PLUG REMOVED FROM
THE MAINS LEAD, IF SEVERED, MUST BE
DESTROYED AS A PLUG WITH A BARED
FLEXIBLE CORD IS HAZARDOUS IF EN-
GAGED INTO A LIVE SOCKET OUTLET.
Should the fuse in the 13 amp plug require
replacement, a 3 amp BS1362 fuse must be
fitted.
This appliance is a double insulated
product and it does not require an earth.
Blender & mill useBlender & mill use
Blender & mill useBlender & mill use
Blender & mill use
Use your blender for soups, sauces, drinks,
pates, mayonnaise, dressings etc.
Use your mill for milling herbs, nuts and coffee
beans.
Features of your blenderFeatures of your blender
Features of your blenderFeatures of your blender
Features of your blender
and mill attachmentand mill attachment
and mill attachmentand mill attachment
and mill attachment
Filler cap
Lid
Jug
Base unit
Cord storage
Control switch
Mill attachment jar
Mill attachment