5
• For maximum filter performance and for optimum
taste, it is important to change your BRITA
MAXTRA Filter Cartridge (9) regularly. BRITA
recommends that you replace the cartridge every
4 weeks.
The unique BRITA Memo
(11) measures the
recommended time of use of your cartridge. The
BRITA Memo is located on the filter kettle handle.
Setting the BRITA Memo
• To start BRITA Memo, please press and hold
down the Start Button (12) until all four bars
appear in the display and flash twice. The BRITA
Memo is now set.
• The Operational Indicator (14) in the bottom right
corner of the BRITA Memo indicates that it is
working.
• Every week, one bar will disappear on the Time
Gauge (13) to show the remaining cartridge life.
After four weeks, all four bars will disappear and a
flashing arrow will indicate that the cartridge
should now be changed. Insert a new cartridge
according to the instructions, and reactivate the
Memo.
BRITA Memo
4
Your Filter Cartridge is ready for use.
3
x2
Fill the kettle to the MAX line as normal and
allow to filter through completely to flush the
cartridge. Repeat twice
2
Push the Filter Cartridge into the BRITA
Hopper (10) until firmly in place. The Filter
Cartridge should stay in place if the kettle is
upside down.
Replacing the filter cartridge
1
Immerse the BRITA MAXTRA Filter Cartridge
(9) in water. Shake gently to remove any air
bubbles.
after 4 weeksfull
43960 rev1_Layout 1 30/08/2012 16:21 Page 5