Moyer Diebel 401HTN Dishwasher User Manual


 
7
Installation
Drain Connections
1. All models have a 6 ft. 5/8" I.D. drain hose. The maximum drain height connection
must not exceed 3 ft.[0.9 m].
2. The drain hose is located at the rear of the dishwasher. A 5/8" hose-barb tting is
strapped to the drain hose to connect the drain hose.
3. The drain hose is secured to the rear of the machine by a clamp to maintain a
goose-neck bend in the drain hose.
DO NOT REMOVE THE DRAIN HOSE RETAINING CLAMP.
DO NOT STRETCH THE DRAIN HOSE.
4. Install the drain hose to a "WYE" drain tting. Connection to a "TEE" tting will
prevent the dishwasher from draining completely.
5. The maximum drain ow is 15 US gpm/12.5 Imp gpm/57 Lpm
6. Make sure the drain hose does not kink. Kinks will prevent the dishwasher
from draining completely.
NOTE
The dishwasher drains in 8 seconds and drain water exits the hose with considerable force.
ATTENTION
Do not connect the drain hose to a disposer. The dishwasher will not drain correctly.
The dishwasher flexible drain hose
must be connected to a WYE fitting.
Do not connect the dishwasher
flexible drain hose to a TEE fitting.