Moyer Diebel 401-LT Dishwasher User Manual


 
3
GENERAL
GENERAL
This manual covers the Moyer Diebel 401 undercounter dishwashing machine. This machine
is fully automatic and is equipped with a 1/2 H.P. pump motor. All models are available for
mounting directly to the floor or on optional stands (see accessories listed on page 4).
Standard equipment includes:
-Automatic tank fill -Wash/rinse arm
-Common utility connections -Two dish racks (peg and flat)
-120 Volt control circuit -Exclusive vent design for
-Convenient, easy to use controls venting of condensation
-Door latch activated start switch -Stainless steel heavy-gauge construction
-Pumped drain (to 3 ft/1m) (vertical)
This series of dishwashers is available in the following models:
Model Numbers
401-HT, 401-HTN, 401-LT
The 401-HT model is a high temperature (82°C/180°F rinse) sanitizing model with booster.
The 401-HTN model is a high temperature (82°C/180°F rinse) sanitizing model without
booster.
The 401-LT model is a low temperature (60°C/140°F rinse) sanitizing model for use with
5.25% or 8.4% sodium hypochlorite solution (chlorine bleach) as a sanitizing agent. The
rinse aid pump is optional.
Options
Kit 512 - Detergent pump (P/N 0709624)
Kit 504 - Top and side panels (P/N 0708756)
Kit 505 - Top panel only (P/N 0708744)
Kit 506 - Left side panel only (P/N 0708745)
Kit 507 - Right side panel only (P/N 0708746)
Kit 508 - Rinse aid pump kit (P/N 0708754)
Kit 510 - Extended reach pumped drain kit (P/N 0708766)
Kit 511 - 30°C/70°F temperature rise booster (P/N 0708753)
(for 49°C/110°F supply water).