Moyer Diebel MH-60M2 Dishwasher User Manual


 
INITIAL START-UP
16
Install the Scrap Screens
and Drain-Overflow Assembly
Install scrap screens.
Make sure rubber stopper
is secure on the drain-
overflow assembly.
Make sure the drain-overflow
seats securely in the
tank bottom.
MAKE SURE DOORS
ARE FULLY CLOSED.
INITIAL START-UP
The controls are located
on the front of the dishwasher.
A- On/Off power switch
B- Power indicator Light
C- In cycle light
D- Extended wash switch
E- Final rinse
pressure gauge
F- Wash water
temperature gauge
Complete the installation
After plumbing and electrical connections are made, follow
the steps below to complete the installation of your dishwasher.
1. Remove the white protective covering from the
exterior of the machine.
2. Remove any foreign material from inside
the machine.
3. Make sure dishwasher power switch is off.
4. Turn main water supply on.
5. Turn main power on at the main power
service disconnect switch.
1
2
B
A
C
D
F
E