Filter
Top Products
10 11
Brewing Coffee Later
For Models ARX10, ARX11, ARX20 and ARX23 only:
You must set the time for when you would like
the coffeemaker to begin brewing your coffee.
1) While the switch is in the Off position,
press and hold the BREW button.
2) While still pressing and holding the brew button,
press and hold the HOUR button until the clock
displays the hour you desire. The PM indicator
will light to indicate a PM time; if the PM
indicator is not lit, the time is AM.
3) While still pressing and holding the brew button,
press and hold the MIN. button until the clock
displays the correct minute.
4) Release the brew button.
5) Push the switch to Auto.
The Delay Brew indicator will light. The delay
timer is set and the coffeemaker will begin
brewing the coffee at the time you selected.
If you want your coffee to brew at the
same time the following day, simply
add the desired amount of ground
coffee, fill the water reservoir and
slide the button to AUTO.
6) Place the decanter on the warming plate.
Make sure the decanter is accurately
centered on the warming plate or the water
and grounds will overflow from the brew
basket. An overflow may cause personal
injury or damage to property.
To reduce the risk of damaging the decanter
and/or the risk of personal injury, do not
add cold water to the decanter if the
decanter is already hot. Allow the decanter
to cool before using.
Do not brew coffee while the brew basket
lid is open.
Brewing Coffee Now
For Models AR10, AR11, AR12 and AR13 only:
Push the switch to ON.
The ON/OFF switch will light, indicating that the
coffeemaker is On and the brew cycle will begin.
When the coffee stops flowing, the brew cycle
is complete.
While the coffee is brewing, the Pause ‘n
Serve feature allows you to sneak a cup
of coffee from the decanter. REPLACE THE
DECANTER ON THE WARMING PLATE WITHIN
30 SECONDS TO PREVENT OVERFLOW AND
POSSIBLE INJURY.
To turn Off the coffeemaker, press the ON/OFF
switch to Off.
If the brew basket overflows or fails
to empty into the decanter, do not
open the brew basket. Unplug the
coffeemaker and wait for the contents
to cool before handling.
For Models ARX10, ARX11, ARX20 and ARX23 only:
Slide the switch to On. Press the
brew button when ready to start brewing.
To turn the coffeemaker Off,
slide the switch to Off.
Your Coffeemaker will keep your coffee hot
for 2 hours, then automatically shut off.