Filter
Top Products
10 11
Do you still have questions? You can call us toll-free at the MR. COFFEE
®
Consumer Service
Department 1-800-MR. COFFEE® (1-800-672-6333) or you can visit us at www.mrcoffee.com
THE COFFEE
GROUNDS
PRODUCED
ARE
INSUFFICIENT
hopper
position during operation
two Burr Mills
SET GRINDER SETTING CORRECTLY
ADD BEANS TO HOPPER
PLACE CHAMBER IN PROPER POSITION
UNPLUG UNIT, PLACE TOP BURR MILL IN
PROPER POSITION
CLEAN UNIT, UNPLUG IT AND CLEAN BURR
MILL
UNPLUG UNIT AND CAREFULLY DISLODGE
FOREIGN OBJECT
THE SIZE OF
GROUND
COFFEE
PARTICLES
IS NOT
CONSISTENT
two Burr Mills
CLEAN UNIT, UNPLUG IT AND CLEAN BURR
MILL
UNPLUG UNIT AND CAREFULLY DISLODGE
FOREIGN OBJECT
TURN HOPPER TO CORRECT GRIND SETTING
THE UNIT
STOPS
GRINDING
correct position
clogging the Burr Mill compartment
is open
SET GRIND SETTING CORRECTLY
PRESS AND HOLD BRIEFLY START/STOP
BUTTON AGAIN
REPLACE; UNPLUG UNIT AND CLEAN
BURR MILL COMPARTMENT IF NEEDED
THEN PLUG BACK IN AND USE AS
NEEDED
THE CUP
SELECTION DIAL
DOES NOT TURN
counterclockwise anymore
clockwise anymore
TURN CLOCKWISE TO SET DESIRED
NUMBER OF CUPS
TURN COUNTER CLOCKWISE TO SET
DESIRED NUMBER OF CUPS
CALL MR. COFFEE
®
DEPARTMENT NUMBER BELOW
THE GRIND
SETTING HOPPER
DOES NOT TURN
turn clockwise anymore
two Burr Mills
DESIRED GRIND SETTING
Burr Mill
DISLODGE FOREIGN OBJECT
Troubleshooting cont.
Your MR. COFFEE
®
Burr Mill has been carefully designed to give you many years of trouble-free
service. In the unlikely event that your new Burr Mill does not operate satisfactorily, please review
the following potential problems and try the steps recommended BEFORE you call an Authorized
Sunbeam Service Center.
TROUBLESHOOTING YOUR MR. COFFEE
®
BURR MILL
PROBLEM POSSIBLE CAUSE SOLUTION
THE UNIT DOES
NOT GRIND
position
is open
TURN HOPPER CLOCKWISE UNTIL STOPS, THEN
DESIRED GRIND SETTING
SECURE HOPPER LID
PLACE CHAMBER IN PROPER POSITION
PRESS AND HOLD BRIEFLY START/STOP BUTTON
PLUG UNIT IN
WAIT FOR POWER TO BE RESTORED
UNPLUG UNIT FOR AT LEAST AN HOUR THEN
PLUG BACK IN AND USE AS NEEDED
BLOCKAGE
11. Clean after every third use for best performance.
12. After using, open the grinder to the coarsest setting and run empty to clear the
grinding path.
NOTE: For optimum freshness of your coffee beans, do NOT store in the bean hopper for
extended periods of time.
CLEANING INSTRUCTIONS
Remember to always clean your Burr Mill before using it for the first time. Then, to ensure
optimal mill function and durability, clean it regularly following these simple steps:
1. Always unplug your Burr Mill after use and before cleaning.
2. Wash the bean hopper and coffee chamber parts with warm soapy water. (Never
use abrasive cleansers, steel wool pads or other abrasive materials. UNIT IS NOT
DISHWASHER SAFE)
CAUTION! Never immerse the Burr Mill itself in water, in any other liquid or place
in the dishwasher.
3. Dry all pieces thoroughly.
4. Install the Bean Hopper onto the unit and turn clockwise (several rotations-will hear
clicking as unit gets tighter) until it stops with the grind size indicator on Fine.
5. Place chamber lid back on grinder chamber and then install into unit, tightly locking into
place.
NOTE: If all Bean Hopper and Grinding Chamber parts are not tightly in place correctly, the
safety switches within the machine will not allow the grinder to work. You MUST
have all parts in place to safely use the Burr Mill.