Mr. Coffee COFFEE MILL Coffee Grinder User Manual


 
6. When desired grind has be obtained, release the safety switch and wait 10 seconds
for blades to stop. DO NOT REMOVE COVER UNTIL BLADES COME TO A
COMPLETE STOP
7.
Unplug the unit. With one hand securing the cover, turn the coffee mill upside down
and tap the cover lightly to insure that all of the coffee grounds have
fallen into the cover.
8.
While the unit is still upside down, carefully remove the cover filled with the ground
coffee and transfer the grounds to your coffeemaker.
1.
You’ll need no more than 30 seconds to produce any coffee grind you desire
2. Your coffee mill needs to cool off after each 60 seconds of use. This cooling off
period protects your ground coffee from becoming overheated before it’s brewed
3.
Coffee grounds left in your coffee mill can become stale and affect the flavor of
freshly ground coffee. Avoid this by removing any leftover coffee grounds from the
grinding bowl.
4.
Don’t grind the.coffee too fine. Paper coffee filters can clog and cause the water
and grounds to overflow.
5.
Vary the grinding time to suit your tastes and the type of beans you grind.
1. Unplug your coffee mill.
2.
DO NOT PLACE THIS COFFEE MILL IN WATER. DO NOT IMMERSE THE
BLADES OR MOTOR BASE IN WATER.
3.
Remove the coffee
mill
cover and wash in warm sudsy water. The cover IS not
-- dishwasher safe.
4. Use a clean cloth or paper towel to remove any remaining grounds from the
grinding bowl.
5. Be sure to clean your coffee mill completely after each use.
6. Do not try to oil or sharpen the blades. The blades are permanently lubricated and
never need sharpening.
ANY SERVICING OF THIS APPLIANCE SHOULD BE PERFORMED
ONLY
BY AN
AUTHORIZED MR. COFFEE SERVICE CENTER
Please do not return this appliance to your store.
For additional information regarding service, please call
1-800-MR COFFEE (l-800-672-6333; U.S.A. and Canada)
Our office hours are
8:30
AM
-
5:00 PM Eastern Time Zone Monday thru Friday
Please include model number in all communications.
PAGE 5