Filter
Top Products
76
Coffeemaker Features
5
8
7
6
2
1
10
4
1.
ON/OFF Switch
2.
Control Panel
(Programmable Models Only)
a.
Delay Brew Button
b.
PM Indicator
c.
Hour Button
d.
Minute Button
e.
Clock Display
f.
On-Off Indicator
g.
On Button
h.
Off Button
i.
Set Delay Button
j.
Delay Brew Indicator
3.
Removable Filter Insert
4.
Brew Basket
5.
Water Reservoir
6.
Power Cord
7.
Warming Plate
8.
Decanter
9.
MR. COFFEE
®
Brand
Permanent Cone Filter
(Models ESX30 and
ESX33 only)
10.
MR. COFFEE
®
Brand
8- to 12-Cup Cone Style
Coffee Filters
9
3
Adjusting the Power Cord Length
You can customize the length of the power cord
so that it is the exact length you desire.
To increase the length of the power cord:
Grasp the power cord (not the power plug)
and gently lift it out of the slot, then pull it
away from the coffeemaker.
To decrease the length of the power cord:
Grasp the power cord, lift it out of the slot,
then feed it into the coffeemaker.
Lock the cord in the slot when finished.
Setting the Clock
(Programmable Models Only)
The clock flashes on the control panel to indicate
that it has not been set.
You must set the clock if you want to use
the DELAY BREW feature.
To set the clock:
1) Press and hold the HOUR button until the clock
displays the correct hour. See Figure A-1.
The PM indicator will light to indicate a PM time;
if the PM indicator is not lit, the time is AM.
2) Press and hold the MIN. button until the clock
displays the correct minute. See Figure B-1.
The clock is now set.
c
e
a
b
f
g
i
j
d
h
F
IGURE
A-1
F
IGURE
B-1