Mr. Coffee ID577 Coffee Grinder User Manual


 
1510
Your MR. COFFEE
®
Precision™ Coffee Grinder with Chamber Maid™ Cleaning System has
been carefully designed to give you many years of trouble-free service. In the unlikely
event that your new coffee grinder does not operate satisfactorily, please review the
following potential problems and try the steps recommended BEFORE you call an
Authorized Sunbeam Service Center.
PROBLEM POSSIBLE CAUSE SOLUTION
UNIT DOES NOT GRIND • Grinding chamber lid is open • CLOSE GRINDING
CHAMBER LID
• Grinding chamber • PLACE CHAMBER
is not in position IN PROPER POSITION
• Start Lever has not been • PRESS AND HOLD
pressed START LEVER
• Unit is unplugged • PLUG UNIT IN
There’s a power outage • WAIT FOR POWER
TO BE RESTORED
• If after trying all of the above • CALL AUTHORIZED
the unit still does not grind, SUNBEAM SERVICE
the motor has overheated, CENTER
thermal fuse is broken
THE COFFEE GROUNDS • Grind setting or cups • SET GRIND SETTING
PRODUCED ARE NOT setting is incorrect or CUPS SETTING
PROPERLY GROUND CORRECTLY
• Insufficient amount of • ADD BEANS TO
whole beans used GRINDING CHAMBER
Please do not exceed maximum capacity of 12 tbsp.
• Chamber lid opened • CLOSE GRINDING
during operation CHAMBER LID
• Unit is not clean • UNPLUG UNIT,
CLEAN IT AS PER
INSTRUCTIONS AND
PLUG IT IN AGAIN
• Foreign object is obstructing • UNPLUG UNIT AND
the grinder blades CAREFULLY
DISLODGE FOREIGN
OBJECT
UNIT STOPS GRINDING • Grinding chamber lid • CLOSE GRINDING
has been opened CHAMBER LID
Unit has been unplugged • PLUG UNIT IN
There’s a power outage • WAIT FOR POWER
TO BE RESTORED
Do you still have questions? You can call us toll-free at the MR. COFFEE
®
Consumer Service Department, 1-800-MR COFFEE (1-800-672-6333) or you can visit us
at www.mrcoffee.com.
TROUBLESHOOTING YOUR MR. COFFEE
®
PRECISION™ COFFEE
GRINDER
DIAGRAMA DE LAS PARTES
12
10
8
6
4
Auto-Off
Timer
Fine
Med
Coarse
G
r
i
n
d
C
u
p
s