Mr. Coffee NL4 Coffeemaker User Manual


 
1110
Brewing Coffee Later
For Models NLX4 and NLX5:
You must set the time for when you would like
the coffeemaker to begin brewing your coffee.
1) While the switch is in the OFF position,
press and hold the BREW button.
2) While still pressing and holding the brew button,
press and hold the HOURS button until the clock
displays the hour you desire. The PM indicator
will light to indicate a PM time; if the PM
indicator is not lit, the time is AM.
3) While still pressing and holding the brew button,
press and hold the MIN. button until the clock
displays the correct minute.
4) Release the brew button.
5) Slide the switch to AUTO.
The Delay Brew timer is set and the coffeemaker
will begin brewing the coffee at the time you
selected.
If you want your coffee to brew at
the same time the following day,
simply add the desired amount of
ground coffee, fill the water reservoir
and slide the button from OFF to AUTO.
Brewing Coffee Now
For Models NL4 and NL5:
Push the switch to ON.
The ON/OFF switch will light, indicating that the
coffeemaker is On and the brew cycle will begin.
When the coffee stops flowing, the brew cycle
is complete.
While the coffee is brewing, the Pause ‘n
Serve feature allows you to sneak a cup
of coffee from the decanter. REPLACE THE
DECANTER ON THE WARMING PLATE WITHIN
30 SECONDS TO PREVENT OVERFLOW AND
POSSIBLE INJURY.
To turn Off the coffeemaker, push the ON/OFF
switch to OFF.
If the brew basket overflows or fails
to empty into the decanter, do not
open the brew basket. Unplug the
coffeemaker and wait for the contents
to cool before handling.
For Models NLX4 and NLX5:
Slide the switch to ON. Press the
brew button when ready to start brewing.
Your coffeemaker will keep your coffee hot
for 2 hours, then automatically shut off.
To turn the coffeemaker Off,
slide the switch to OFF.